After the grinder is transported from the Manufacturer or storage location to the installation site, it needs to be cleaned due to exposure to dust and dirt during production or storage. Before installation, each component must be cleaned, and the integrity of each component and the completeness of the required tools must be confirmed. This specifically includes the following aspects: 1. Cleaning of each component of the grinder. When the components of the grinder are transported to the installation site, the protective materials, dust, dirt, rust-proof oil, and other impurities on the processing surfaces of each component should first be removed. Additionally, the model and integrity of each component should be checked according to the installation drawings to ensure that no components are missing and that each component is intact.
After the grinder is transported from the Manufacturer or storage location to the installation site, it needs to be cleaned because it may have come into contact with dust and dirt during production or storage. Before installation, each component must be cleaned, and the integrity of each component and the completeness of the required tools must be confirmed. This includes the following aspects:
1. Cleaning of each component of the grinder. When the components of the grinder are transported to the installation site, the protective materials, dust, dirt, anti-rust oil, and other impurities on the processing surfaces of each component should be removed first. Then, the Model and integrity of each component should be checked according to the installation drawings to ensure that no components are missing and that each component is complete.
2. Preparation of dry oil and thin oil. During the installation process of the grinder, to ensure that the connections and contact parts of each component remain lubricated, thin oil is usually used on the moving surfaces of the components, and dry oil is used on the fixed surfaces of the components. Therefore, dry oil and thin oil should be prepared before installation.
3. Preparation of required tools. The tools used during installation vary depending on the type and model of the grinder. Therefore, before installation, the required tools should be prepared according to the type of grinder and the installation manual, such as a level, electronic theodolite, and steel ruler, to prevent delays in the installation work due to incomplete tools.
